Small Event Kit

Counter Workstation 500:

1. Insert the four poles into the base as shown.
2. Tighten the thumbscrew to secure the poles in place.
3. Insert the counter top on to the poles then secure in place by tightening the thumb screws.
4. Apply the wrap to the counter with Velcro.

Genesis Roller Banner:

1. Remove the banner from the supplied carry bag.
2. The lightweight aluminium base has two twist out support feet. These two feet must be angled at 90 degrees to the base, as shown.
3. The pole is made up of three smaller sections, linked with elastic bungee cord. Slot the three sections together.
4. Insert one end of the pole into the secure fitting, located in the base.
5. The graphic panel pulls out smoothly from the base.
6. Attach the graphic to the support pole as shown.

Acrylic Leaflet Holder:

1. Slide locking tabs away from the base of the unit.
2. Fully open the concertina style frame.
3. Rotate both pivot arms 180 degrees.
4. Slide locking tabs over the pivot arms.