Photos & Video Tension Banner Stand

We aim to provide you with high quality, easy to setup and environmentally friendly portable banner displays that will make your brand stand out from the crowd at any given event. The 'How To' video below shows just how quick and simple it is to build your Tension Banner Stand roller banner stand as well as providing ideas of how, where and when you can use your Tension Banner Stand display stand to make the ultimate impact.

prev next

 

Our Tension banner stand is the budget option from Marler Haley's range of tension banner stands. Our Tension banner stand is very easy to set up. Here's how:

1. Remove the graphic, pole and base from the supplied carry bag.
2. There is a male fitting on the graphic, and a female fitting on one end of the base. Thread male and female ends together, as shown.
3. Tighten the wingnut to secure the base to the graphic.
4. The pole is made up of 3 smaller sections, linked with elastic bungee cord. The three sections then slot together.
5. Insert one end of the pole into the fitting located in the base.
6. The top of the graphic clips into the top of the support pole, at an angle as shown.
7. You can tilt the banner backwards for reach as necessary.
 
Order Now
Enquire Now
 
Call Freephone
0800 151 3750